HPE E7W00A MSA 1040 2-Port Fibre Channel Dual Controller SFF Storage

HPE E7W00A Modular Smart Array 1040 Dual Port Fibre Channel Dual Controller SFF Storage - Hard Drive Array (Clean Bulk - Grade A with 30 Days Warranty)

The MSA 1040 Arrays are designed to allow an installation to begin with smaller capacity and be able to grow gradually as needed. The flexibility of SAS or SAS MDL drives technology, form factors, sizes, speeds, and costs per GB allows a system to easily fit in almost any budget. In addition to the usual RAID levels, the MSA 1040 features several important additional levels. RAID 6 is the highest level of RAID protection. It allocates two sets of parity data across drives and allows simultaneous write operations. It can withstand two simultaneous drive failures without downtime or data loss. RAID 10 is mirroring and striping without parity. RAID 50 combines the block striping and parity of RAID 5 with the straight block striping of RAID 0, yielding higher performance than RAID 5 through the addition of RAID 0, particularly during writes.
MSA 1040 supports hot plug expansion and replacement of redundant controllers, enclosures, fans, power supplies, and I/O modules for simple, fast installation and maintenance. Hot add expansion of disk enclosures is also supported.
MSA 1040 Arrays come standard with 64 snaps, 512 snaps available. This controller based functionality offers higher levels of data protection, enables an almost instant recovery from data failure or corruption and offers alternative development testing of "offline" production data and the ability to backup snapped/cloned data.

Specification

Brand: HPE
MPN: E7W00A

Option Part Number: E7W00A

General

Device Type: Hard Drive Array
Enclosure Type: Rack-Mountable - 2U

Storage

Max Supported Capacity: 28.8 TB
HDD Array External Interface: 8Gb Fibre Channel
Maximum LUNs: 512

Storage Controller

Type: RAID
Installed Qty: 2
Interface Type: SAS 6Gbps
Data Transfer Rate: 6 Gb/sec
Cache / Buffer Size (Max): 4 GB
RAID Level: RAID 0, RAID 1, RAID 3, RAID 5, RAID 6, RAID 10, RAID 50

Storage Controller (2nd)

Installed Qty: 2

Hard Drive

Type: No HDD

Expansion / Connectivity

Expansion Bays: 24 (Total) / 24 (Free) x Hot-Swap - 2.5" SFF
Interfaces: 4 x 8Gb Fibre Channel; 2 x USB (Management); 2 x Ethernet 1000Base-T (Management) - RJ-45; 2 x SAS 6Gb/s - 26 Pin 4x Shielded Mini MultiLane SAS (SFF-8088)

System Requirements

OS Required: Red Hat Linux, SUSE Linux Enterprise Server, Microsoft Windows Server 2008 SP2, Microsoft Windows Server 2012

Miscellaneous

Features: Firmware Upgradable
Compliant Standards: FCC Class A certified, CISPR 22 Class A, CISPR 24, EN 61000-3-2, GS, EN 61000-3-3, EN55022 Class A, CCC, FCC Part 15, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1-03, WEEE, RoHS, EN55024 Class A, VCCI Class A, KN24, KN22 Class A, China RoHS, CNS 13438

Power

Power Device: 2 x Internal Power Supply - Hot-Plug
Max Supported Qty: 2
Power Redundancy: Yes
Power Redundancy Scheme: 1+1
Voltage Required: AC 120/230 V - 50/60 Hz
Power Consumption Operational: 337 Watt

Dimensions & Weight

Width: 19.00 inch
Depth: 19.50 inch
Height: 3.50 inch
Weight: 29.10 lbs

Environmental Parameters

Min Operating Temperature: 41 °F
Max Operating Temperature: 104 °F
Humidity Range Operating: 10 - 90% (Non-Condensing)

Contact us with any questions or to verify this model’s compatibility with your current server or storage array.