HPE 861680-004-SC 4TB 7200RPM 3.5in SATA-6G Midline G8 G9 HDD

HPE 861680-004-SC 4TB 7200RPM 3.5inch Large Form Factor Smart Carrier SATA-6Gbps Hot-Swap Midline Hard Drive for ProLiant Gen8 Gen9 Gen10 Servers (Grade A - Clean with 30 Days Warranty)

HPE Server Midline Hard Drives deliver the highest capacity, performance and reliability to your datacenter applications. Midline hard drives allow you to store more data without sacrificing performance or reliability; they are ideal to store all your bulk storage requirements. HPE Server Midline Hard Drives are available in both 3.5-inch Large Form Factor (LFF) and 2.5-inch Small Form Factor (SFF) and ship with a standard one-year warranty. All HPE hard drives pass a rigorous qualification process, which certify that every drive is proven to perform in your HPE ProLiant Server environments. Before final certification, all HPE Server Midline Hard Drives are optimized for compatibility and functionality, including support of SMART and HPE Systems Insight Manager.

Engineered to Deliver High Performance and Reliability Across HPE server and Storage Platforms
HPE HDDs are tuned and tested with on-going quality monitoring throughout their lifecycle
HPE optimizes HDD firmware for predictable and consistent HDD performance
HPE’s industry-leading rigorous testing and qualification program is backed by 2.4 million test hours
Pre-failure Alerts with HPE Smart Array Controller, Systems Insight Manager, and HPE Smart firmware
3x faster firmware and software updates with HPE Service Pack for ProLiant (HPE SPP)

HPE HDDs are Designed to Deliver Enterprise Class Security at Both Hardware and Firmware Levels
HPE Digitally Signed Firmware helps prevent against malicious attacks
HPE Smart Array SR Secure Encryption is a FIPS 140-2 Level 1 validated enterprise class controller-based encryption solution for data-at-rest on all SAS/SATA drives
HPE Smart Carriers report drive activity and health

HPE Supports Your Data-Driven Applications With a Broad Portfolio of HDDs
HPE Server Midline Hard Drives are ideal for the growing volume of digital content, bulk data storage, cloud and web infrastructure environments
Broad portfolio of HDDs, optimized for HPE server platforms, provide up to 14 TB of storage
Available in 2.5-inch Small Form Factor and 3.5-inch Large Form Factor in a wide variety of capacity points
Simplify HDD planning and standardize HDDs across HPE server and storage solutions
Common HDD carriers offer consistency and compatibility across HPE server platforms

Support Entry/SMB servers with value priced drives
HPE Server Midline Hard Drives have lower start-up costs without sacrificing reliability at the lowest $/GB.
Non-mission critical hard drives at the lowest $/GB.
12 Gb/sec data transfer rate to support existing servers.

Smart Carriers
HPE Hard Drives with smart carriers are designed to provide an interface to communicate critical status and management information. System status LED icons and a spinning activity ring reflecting the data-writing process notify users of the current system status. A blue LED located behind the handle can be activated remotely to guide users to a specific drive tray, while a do-not-remove icon positioned on the tray's eject button lights up to warn users when the removal of the drive would cause data loss.

The HPE 861680-004-SC Midline Hard Drive has a 3.5 inch form factor and a 6 Gbps external data transfer rate. It has a spindle speed of up to 7200 RPM and a 4 TB capacity. This Large Form Factor hard drive uses a SATA-6Gbps interface and has 30 Days Warranty.

Specification

Brand: HPE
MPN: 861680-004-SC

Option Part Number: 734384-B21
Spare Part Number: 734389-001
Model Number: MB4000GCVBU
Assembly Number: 693671-003
HPE GPN: 861680-004

General

Device Type: Hard Drive - Internal
Capacity: 4 TB
Form Factor: 3.5 inch LFF
Interface: SATA 6 Gbps
Bytes per Sector: 512
Drive Technology (Fill): Air
Format Type: 512n
Carrier Type: Smart Carrier (SC)
Workload: Midline
Bundled with: HPE SmartDrive carrier
Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy

Performance

Drive Transfer Rate: 600 MBps (external)
Spindle Speed: 7200 RPM

Expansion & Connectivity

Interfaces: 1 x SATA-6Gb/s
Compatible Bays: 3.5" LFF

Compatibility Information

Designed For

HPE ProLiant BL Series: ProLiant BL420c (Gen8 Gen9) BL460c (Gen8 Gen9) BL465c (Gen8 Gen9)

HPE ProLiant DL Series: DL20 (Gen9) DL60 (Gen9) DL80 (Gen9) DL120 (Gen8 Gen9) DL160 (Gen8 Gen9) DL180 (Gen8 Gen9) DL320e (Gen8 Gen9) DL360e (Gen8 Gen9) DL360p (Gen8 Gen9) DL380e (Gen8 Gen9) DL380p (Gen8 Gen9) DL388 (Gen9)

HPE ProLiant ML Series: ML110 (Gen8 Gen9) ;ML150 (Gen8 Gen9) ML310e (Gen8 Gen9) ML350 (Gen8 Gen9) ML350e (Gen8 Gen9)

HPE ProLiant SL Series: SL200t (Gen8 Gen9) SL230s (Gen8 Gen9) SL250s (Gen8 Gen9) SL2500 SL4550 (Gen8 Gen9) SL4545 (Gen8 Gen9) SL454x

HPE Storage arrays: D3600 D3700

HPE StoreEasy: 1430 1440 1530 1540 1630 1640

Contact us if you have any question about this product to verify the compatibility of this model with your current server or storage array.