HPE B9F25A Ethernet 10Gb Dual Port 561T Network Adapter
- Out of Stock
HPE B9F25A Ethernet 10Gbps Dual Port PCI Express 2.1 x8 561T Network Adapter for ProLiant Integrity Servers (Brand New 3 Years Warranty)
The HPE Ethernet 10GbE Dual Port 561T Adapter features the 10GbE Intel Ethernet Controller X540. The HPE 561T is a low cost, low power dual port 10GBASE-T adapter designed for use in HPE ProLiant Gen8 rack, tower, and scalable servers. The HPE 561T addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization, and scalability to keep up with the HPE ProLiant Gen8 server platform, with proven and reliable performance Hewlett Packard Enterprise customers have come to expect. The HPE 561T adapter enables connections with standard CAT6 or better UTP cabling. The HPE 561T supports high performance networking features such as VLAN tagging, low latency interrupts, TCP and UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, PXE boot, and virtualization features which are VMDq and SR-IOV ready.
Dual-port 10Gb Ethernet 10GBASE-T Standup Adapter Designed for Maximum Network Performance
20Gbps full duplex Ethernet transfer rate per port.
Intel Virtualization Technology for Connectivity (VT-c) with VMDq and SR-IOV supports VMware NetQueue and Microsoft VMQ helping to meet the performance demands of consolidated virtual workloads.
Supports PXE, MSI-X support, Teaming, and IPv6.
Adapter supports HPE Sea of Sensors 3D Technology.
The HPE B9F25A Ethernet 10GbE Dual Port 561T Network Adapters have dual 2 x 10Gb Ethernet - RJ-45 ports to connect desktop and server systems to the network. The B9F25A network card includes a processor 1 x Intel x540 and includes Jumbo Frames support, teaming support, PXE support, Large Send Offload (LSO), Receive Side Scaling (RSS), TCP Segmentation Offload (TSO). This 10GbE dual port 561T adapter comes with 3 Years Warranty.
Option Part Number: B9F25A
Spare Part Number: 717708-001
Device Type: Network Adapter
Form Factor: Plug-in Card
Interface (Bus) Type: PCI Express 2.1 x8
Connectivity Technology: Wired
Data Link Protocol: 10 10 Gigabit Ethernet
Data Transfer Rate: 10 Gbps
Features: Jumbo Frames support, teaming support, PXE support, Large Send Offload (LSO), Receive Side Scaling (RSS), TCP Segmentation Offload (TSO)
Ports: 10Gb Ethernet x 2
Remote Management Protocol: SNMP
Status Indicators: Port status, link/activity
Compliant Standards: IEEE 802.3, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1AX, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau
Processor / Memory
Processor: 1 x x540 - Intel
Expansion / Connectivity
Interfaces: 2 x 10Gb Ethernet - RJ-45
Software / System Requirements
OS Required: SunSoft Solaris 10, Microsoft Windows Server 2008 Foundation, SuSE Linux Enterprise Server 11, SuSE Linux Enterprise Server 10, Red Hat Enterprise Linux 5, Microsoft Windows Server 2008 Enterprise, Microsoft Windows Server 2008 Standard, Microsoft Windows Web Server 2008, Microsoft Windows Server 2008 Datacenter, Red Hat Enterprise Linux 6, Microsoft Windows Small Business Server 2011 Standard, Microsoft Windows Small Business Server 2011 Essentials, Microsoft Windows MultiPoint Server 2011, Citrix XenServer 6.0, Microsoft Windows Server 2012, SunSoft Solaris 11, Citrix XenServer 6.1, VMware vSphere 5.0, VMware vSphere 4.1
Compliant Standards: UL, BSMI, BSMI CNS 13438 Class A, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, WEEE, FCC Part 15 A, VCCI V-3 Class A ITE, EN 55022 Class A
Min Operating Temperature: 32 °F
Max Operating Temperature: 131 °F
HPE Integrity Server: rx2800 i4 Office Friendly Base Server
Contact us if you have any question about this product to verify this model’s compatibility with your current server or storage array.